DR ANTHONY MELVIN CRASTO,WorldDrugTracker, helping millions, A 90 % paralysed man in action for you, I am suffering from transverse mylitis and bound to a wheel chair, With death on the horizon, nothing will not stop me except God................DR ANTHONY MELVIN CRASTO Ph.D ( ICT, Mumbai) , INDIA 25Yrs Exp. in the feld of Organic Chemistry,Working for GLENMARK GENERICS at Navi Mumbai, INDIA. Serving chemists around the world. Helping them with websites on Chemistry.Million hits on google, world acclamation from industry, academia, drug authorities for websites, blogs and educational contribution

Friday 8 July 2016

A Guide to 13-C Nuclear Magnetic Resonance (NMR)

  A Guide to 13-C Nuclear Magnetic Resonance (NMR)

Analytical Chemistry - 13-C NMR Chemical Shifts
Click to enlarge
In previous entries in the Analytical Chemistry series of graphics, we’ve looked at some of the tools that chemists can use to determine the identity of compounds in various samples, including infrared spectroscopy and hydrogen nuclear magnetic resonance (NMR). Today looks another similar method, that of carbon NMR; the graphic provides some general information on interpreting the resultant spectra, whilst we’ll briefly discuss how these signals are created below.

As mentioned, we’ve already discussed nuclear magnetic resonance, or NMR, in a previous post where hydrogen NMR was examined. That post also provides a more thorough overview of how the signals are generated, and the method for carbon-13 NMR is exactly the same – it’s just carbon atoms that are involved, instead of hydrogen atoms.
Like hydrogen atoms, some carbon atoms can have a property called ‘spin’. Spin is a rather abstract concept, but at a simplified level, nuclei that possess this property can be thought of as acting like very small magnets. These magnets, when place in a magnetic field, can align either with or against the field, and this is the basis of NMR. You’ll not I mentioned some carbon atoms, not all. This is because not all carbon atoms have spin; in fact, only carbon-13 atoms do.
Carbon-13 is slightly different from carbon-12, the more abundant isotope of carbon, in that it has an extra neutron in its nucleus, but otherwise its chemical properties are the same. It accounts for just 1% of all carbon atoms, with carbon-12 accounting for the other 99% (there are also some other very low abundance isotopes). It’s the carbon-13 atoms, then, that are responsible for the spectrum seen in carbon NMR, and carbon-12 atoms play no part.
By way of a brief overview of the process by which the spectrum is generated, the sample is put into a machine that can apply both an external magnetic field to the sample, and irradiate it with radio waves. Some machines vary the magnetic field strength and keep the radio frequency fixed, whilst other vary the radio frequency whilst the magnetic field remains the same. Either way, the result is that the carbon-13 nuclei in the sample can absorb energy from the radio waves and ‘flip’, so they are no longer aligned with the magnetic field, but against it. This can be used to generate a signal, which is where the peaks in the resultant spectrum come from.
Much like hydrogen NMR, the environment of the carbon atoms (i.e., the other atoms that it is in proximity to in the molecule) affect where a peak is seen in the spectrum. A closer proximity to electronegative atoms such as oxygen or nitrogen will result in the peak appearing further to the left of the spectrum. Thus, the carbonyl compounds, which all contain a C=O bond, appear on the left-hand side of the spectrum, whilst simpler, alkyl groups containing only C–H bonds appear on the right-hand side of the spectrum.
The low abundance of carbon-13 atoms means that the spectra generated look a little different from those seen in hydrogen NMR. First of all, you might wonder why spectra can be generated at all, considering its low abundance, but bear in mind that even a very small sample will contain millions upon millions of molecules. Therefore, even that 1% of all carbon atoms becomes a large number, meaning a spectrum can still be generated.
Secondly, if you’re familiar with hydrogen NMR spectra, you’ll know that the peaks generated are often split into a multitude of different peaks depending on how many other hydrogens are in proximity on adjacent carbons in the molecule. This can add an extra layer of complexity to interpreting the spectrum. With carbon-13, however, this problem doesn’t exist. Considering their 1% abundance, the probability of two carbon atoms appearing next to each other in the same molecule is extremely low, so for the whole sample, no splitting of peaks is seen. Actually, we would expect to see splitting as a result of interaction with hydrogen nuclei in the sample too, but a technique called ‘decoupling’ prevents this from being seen in the spectrum.
Why is this useful? Well, it’s another item in the chemist’s toolkit that allows us to identify unknown chemicals. Combined with both hydrogen NMR and infrared spectroscopy, identifying simple molecules becomes much easier. It can also give important pointers in more complex molecules.
As always, it’s worth noting that the graphic is designed to give a general overview of the rough points at which different carbon atoms in different environments appear on the spectrum. These are approximate values only, and can be affected by other substituent groups, as well as the temperature and the solvent in which the sample is placed. Also, if you want to read into the technique in more detail, there are some further links provided below.
DOWNLOAD




 
WHAT IS C-13 NMR?

This page describes what a C-13 NMR spectrum is and how it tells you useful things about the carbon atoms in organic molecules.
The background to C-13 NMR spectroscopy Nuclear magnetic resonance is concerned with the magnetic properties of certain nuclei. On this page we are focussing on the magnetic behaviour of carbon-13 nuclei.
Carbon-13 nuclei as little magnets
About 1% of all carbon atoms are the C-13 isotope; the rest (apart from tiny amounts of the radioactive C-14) is C-12. C-13 NMR relies on the magnetic properties of the C-13 nuclei.
Carbon-13 nuclei fall into a class known as "spin ½" nuclei for reasons which don't really need to concern us at the introductory level this page is aimed at (UK A level and its equivalents).
The effect of this is that a C-13 nucleus can behave as a little magnet. C-12 nuclei don't have this property.
If you have a compass needle, it normally lines up with the Earth's magnetic field with the north-seeking end pointing north. Provided it isn't sealed in some sort of container, you could twist the needle around with your fingers so that it pointed south - lining it up opposed to the Earth's magnetic field.
It is very unstable opposed to the Earth's field, and as soon as you let it go again, it will flip back to its more stable state.
Because a C-13 nucleus behaves like a little magnet, it means that it can also be aligned with an external magnetic field or opposed to it.
Again, the alignment where it is opposed to the field is less stable (at a higher energy). It is possible to make it flip from the more stable alignment to the less stable one by supplying exactly the right amount of energy.
The energy needed to make this flip depends on the strength of the external magnetic field used, but is usually in the range of energies found in radio waves - at frequencies of about 25 - 100 MHz. (BBC Radio 4 is found between 92 - 95 MHz!) If you have also looked at proton-NMR, the frequency is about a quarter of that used to flip a hydrogen nucleus for a given magnetic field strength.
It's possible to detect this interaction between the radio waves of just the right frequency and the carbon-13 nucleus as it flips from one orientation to the other as a peak on a graph. This flipping of the carbon-13 nucleus from one magnetic alignment to the other by the radio waves is known as the resonance condition.
The importance of the carbon's environment
What we've said so far would apply to an isolated carbon-13 nucleus, but real carbon atoms in real bonds have other things around them - especially electrons. The effect of the electrons is to cut down the size of the external magnetic field felt by the carbon-13 nucleus.
Suppose you were using a radio frequency of 25 MHz, and you adjusted the size of the magnetic field so that an isolated carbon-13 atom was in the resonance condition.
If you replaced the isolated carbon with the more realistic case of it being surrounded by bonding electrons, it wouldn't be feeling the full effect of the external field any more and so would stop resonating (flipping from one magnetic alignment to the other). The resonance condition depends on having exactly the right combination of external magnetic field and radio frequency.
How would you bring it back into the resonance condition again? You would have to increase the external magnetic field slightly to compensate for the shielding effect of the electrons.
Now suppose that you attached the carbon to something more electronegative. The electrons in the bond would be further away from the carbon nucleus, and so would have less of a lowering effect on the magnetic field around the carbon nucleus.



Note:  Electronegativity is a measure of the ability of an atom to attract a bonding pair of electrons. If you aren't happy about electronegativity, you could follow this link at some point in the future, but it probably isn't worth doing it now!


The external magnetic field needed to bring the carbon into resonance will be smaller if it is attached to a more electronegative element, because the C-13 nucleus feels more of the field. Even small differences in the electronegativities of the attached atoms will make a difference to the magnetic field needed to achieve resonance.
Summary
For a given radio frequency (say, 25 MHz) each carbon-13 atom will need a slightly different magnetic field applied to it to bring it into the resonance condition depending on what exactly it is attached to - in other words the magnetic field needed is a useful guide to the carbon atom's environment in the molecule.
Features of a C-13 NMR spectrum The C-13 NMR spectrum for ethanol
This is a simple example of a C-13 NMR spectrum. Don't worry about the scale for now - we'll look at that in a minute.


Note:  The nmr spectra on this page have been produced from graphs taken from the Spectral Data Base System for Organic Compounds (SDBS) at the National Institute of Materials and Chemical Research in Japan.
It is possible that small errors may have been introduced during the process of converting them for use on this site, but these won't affect the argument in any way.



There are two peaks because there are two different environments for the carbons.
The carbon in the CH3 group is attached to 3 hydrogens and a carbon. The carbon in the CH2 group is attached to 2 hydrogens, a carbon and an oxygen.
The two lines are in different places in the NMR spectrum because they need different external magnetic fields to bring them in to resonance at a particular radio frequency.
The C-13 NMR spectrum for a more complicated compound
This is the C-13 NMR spectrum for 1-methylethyl propanoate (also known as isopropyl propanoate or isopropyl propionate).
This time there are 5 lines in the spectrum. That means that there must be 5 different environments for the carbon atoms in the compound. Is that reasonable from the structure?
Well - if you count the carbon atoms, there are 6 of them. So why only 5 lines? In this case, two of the carbons are in exactly the same environment. They are attached to exactly the same things. Look at the two CH3 groups on the right-hand side of the molecule.
You might reasonably ask why the carbon in the CH3 on the left isn't also in the same environment. Just like the ones on the right, the carbon is attached to 3 hydrogens and another carbon. But the similarity isn't exact - you have to chase the similarity along the rest of the molecule as well to be sure.
The carbon in the left-hand CH3 group is attached to a carbon atom which in turn is attached to a carbon with two oxygens on it - and so on down the molecule.
That's not exactly the same environment as the carbons in the right-hand CH3 groups. They are attached to a carbon which is attached to a single oxygen - and so on down the molecule.
We'll look at this spectrum again in detail on the next page - and look at some more similar examples as well. This all gets easier the more examples you look at.
For now, all you need to realise is that each line in a C-13 NMR spectrum recognises a carbon atom in one particular environment in the compound. If two (or more) carbon atoms in a compound have exactly the same environment, they will be represented by a single line.


Note:  If you are fairly wide-awake, you might wonder why all this works, since only about 1% of carbon atoms are C-13. These are the only ones picked up by this form of NMR. If you had a single molecule of ethanol, then the chances are only about 1 in 50 of there being one C-13 atom in it, and only about 1 in 10,000 of both being C-13.
But you have got to remember that you will be working with a sample containing huge numbers of molecules. The instrument can pick up the magnetic effect of the C-13 nuclei in the carbon of the CH3 group and the carbon of the CH2 group even if they are in separate molecules. There's no need for them to be in the same one.



The need for a standard for comparison - TMS
Before we can explain what the horizontal scale means, we need to explain the fact that it has a zero point - at the right-hand end of the scale. The zero is where you would find a peak due to the carbon-13 atoms in tetramethylsilane - usually called TMS. Everything else is compared with this.
You will find that some NMR spectra show the peak due to TMS (at zero), and others leave it out. Essentially, if you have to analyse a spectrum which has a peak at zero, you can ignore it because that's the TMS peak.
TMS is chosen as the standard for several reasons. The most important are:
  • It has 4 carbon atoms all of which are in exactly the same environment. They are joined to exactly the same things in exactly the same way. That produces a single peak, but it's also a strong peak (because there are lots of carbon atoms all doing the same thing).
  • The electrons in the C-Si bonds are closer to the carbons in this compound than in almost any other one. That means that these carbon nuclei are the most shielded from the external magnetic field, and so you would have to increase the magnetic field by the greatest amount to bring the carbons back into resonance.
    The net effect of this is that TMS produces a peak on the spectrum at the extreme right-hand side. Almost everything else produces peaks to the left of it.
The chemical shift
The horizontal scale is shown as (ppm). is called the chemical shift and is measured in parts per million - ppm.
A peak at a chemical shift of, say, 60 means that the carbon atoms which caused that peak need a magnetic field 60 millionths less than the field needed by TMS to produce resonance.
A peak at a chemical shift of 60 is said to be downfield of TMS. The further to the left a peak is, the more downfield it is.


Note:  If you are familiar with proton-NMR, you will notice that the chemical shifts for C-13 NMR are much bigger than for proton-NMR. In C-13 NMR, they range up to about 200 ppm. In proton-NMR they only go up to about 12 ppm. You don't need to worry about the reasons for this at this level.


Solvents for NMR spectroscopy
NMR spectra are usually measured using solutions of the substance being investigated. A commonly used solvent is CDCl3. This is a trichloromethane (chloroform) molecule in which the hydrogen has been replaced by its isotope, deuterium.
CDCl3 is also commonly used as the solvent in proton-NMR because it doesn't have any ordinary hydrogen nuclei (protons) which would give a line in a proton-NMR spectrum. It does, of course, have a carbon atom - so why doesn't it give a potentially confusing line in a C-13 NMR spectrum?
In fact it does give a line, but the line has an easily recognisable chemical shift and so can be removed from the final spectrum. All of the spectra from the SDBS have this line removed to avoid any confusion.


Update November 2014:   If you have already read the introductory page about proton NMR, you may have read a similar note to this. If so, there is no real need to read it again.
In the explanations above, I have described an NMR spectrum as being produced by having a fixed radio frequency, and varying the magnetic field to find the resonance conditions for the C-13 atoms in their various environments.
It has been pointed out to me that newer NMR machines actually fix the magnetic field and vary the radio frequency instead. In fact, the most modern machines send a pulse covering a wide spectrum of radio frequencies, and use a computer to sort it all out afterwards.
Do you need to worry about this? No. Provided you are meeting this at an introductory level for exams at an age of about 18, it is pretty unlikely that you will need details of how the machines work. What matters is that you can interpret the resulting NMR spectra.
Personally, I prefer the version involving changing the magnetic field because it is much more obvious to explain, even if the method itself is a bit old-fashioned.
You may not need to bother about this next bit!
If you have come across this alternative method, some of the wording will be different, and that's all. Check your past exam papers and marks schemes to see whether your examiners ever ask questions about how NMR spectra are produced, and which method they talk about.
If they never ask questions about it, or if they expect answers in terms of varying the magnetic field, stop here!
What differences are there if you vary the frequency?
Think about TMS, the standard which has the maximum amount of magnetic shielding of the carbon atoms by the electrons. That reduces the strength of the magnetic field experienced by the carbon nuclei more than in any other carbon compound. It therefore needs the maximum increase in the external magnetic field to reach the resonance condition if you are varying the magnetic field.
But what if you are varying the frequency of the radio waves instead of the magnetic field?
The weaker magnetic field experienced by the carbon nuclei in TMS will reduce the energy gap between the two states the carbon nuclei can take up - aligned with and against the magnetic field.
Think about it like this:
Suppose you had the compass needle described at the beginning of this page surrounded by a fairly weak magnetic field. It wouldn't take much effort to move it so that it was aligned against the magnetic field. The energy gap between the two states would be pretty small.
Now suppose it was in an intense magnetic field. It would be very difficult to move it so that it was aligned against the field. The energy gap would be much increased by the stronger magnetic field.
So the carbon atoms in TMS, which are better shielded by the electrons around them than any other carbon compound, will have the smallest energy gap between the two states.
The energy of the radio waves is related to their frequency. That means that if you are varying the frequency, TMS will need a lower frequency than any other carbon compound to bring it into resonance.
That has taken a long time to say, but it comes down to the fact that
  • If you are varying magnetic field, TMS will need the greatest external magnetic field to reach the resonance condition.
  • If you are varying the radio wave frequencies, TMS will need the lowest frequency to reach the resonance condition.
The delta shift works exactly the same in both cases.
  • A delta shift of 60 means that a particular compound needs a magnetic field 60 millionths less than that of TMS to reach resonance.
  • A delta shift of 60 means that a particular compound needs a radio frequency 60 millionths more than that of TMS to reach resonance.
DO NOT learn both of these. Just learn the way your examiners expect. None of this makes any difference to the way NMR spectra are interpreted which is probably all you need anyway.




Interpreting C-13 NMR Spectra


This page takes an introductory look at how you can get useful information from a C-13 NMR spectrum.

Introduction

Taking a close look at three 13C NMR spectra below. The 13C NMR spectrum for ethanol
 
Note
The nmr spectra on this page have been produced from graphs taken from the Spectral Data Base System for Organic Compounds (SDBS) at the National Institute of Materials and Chemical Research in Japan. 
Remember that each peak identifies a carbon atom in a different environment within the molecule. In this case there are two peaks because there are two different environments for the carbons. The carbon in the CH3 group is attached to 3 hydrogens and a carbon. The carbon in the CH2group is attached to 2 hydrogens, a carbon and an oxygen. So which peak is which?
You might remember from the introductory page that the external magnetic field experienced by the carbon nuclei is affected by the electronegativity of the atoms attached to them. The effect of this is that the chemical shift of the carbon increases if you attach an atom like oxygen to it. That means that the peak at about 60 (the larger chemical shift) is due to the CH2 group because it has a more electronegative atom attached.
 
Note
In principle, you should be able to work out the fact that the carbon attached to the oxygen will have the larger chemical shift. In practice, you always work from tables of chemical shift values for different groups (see below).
What if you needed to work it out? The electronegative oxygen pulls electrons away from the carbon nucleus leaving it more exposed to any external magnetic field. That means that you will need a smaller external magnetic field to bring the nucleus into the resonance condition than if it was attached to less electronegative things. The smaller the magnetic field needed, the higher the chemical shift.
A table of typical chemical shifts in C-13 NMR spectra
carbon environment chemical shift (ppm)
C=O (in ketones) 205 - 220
C=O (in aldehydes) 190 - 200
C=O (in acids and esters) 170 - 185
C in aromatic rings 125 - 150
C=C (in alkenes) 115 - 140
RCH2OH 50 - 65
RCH2Cl 40 - 45
RCH2NH2 37 - 45
R3CH 25 - 35
CH3CO- 20 - 30
R2CH2 16 - 25
RCH3 10 - 15
In the table, the "R" groups won't necessarily be simple alkyl groups. In each case there will be a carbon atom attached to the one shown in red, but there may well be other things substituted into the "R" group.
If a substituent is very close to the carbon in question, and very electronegative, that might affect the values given in the table slightly.
For example, ethanol has a peak at about 60 because of the CH2OH group. No problem! It also has a peak due to the RCH3 group. The "R" group this time is CH2OH. The electron pulling effect of the oxygen atom increases the chemical shift slightly from the one shown in the table to a value of about 18.
A simplification of the table:
carbon environment chemical shift (ppm)
C-C 0 - 50
C-O 50 - 100
C=C 100 - 150
C=O 150 - 200
This may, of course, change and other syllabuses might want something similar. The only way to find out is to check your syllabus, and recent question papers to see whether you are given tables of chemical shifts or not.

Example: 3-buten-2-one
The 13C NMR spectrum for but-3-en-2-one. This is also known as 3-buten-2-one (among many other things!)
Here is the structure for the compound:
You can pick out all the peaks in this compound using the simplified table above.
  • The peak at just under 200 ppm is due to a carbon-oxygen double bond. The two peaks at 137 ppm and 129 ppm are due to the carbons at either end of the carbon-carbon double bond. And the peak at 26 is the methyl group which, of course, is joined to the rest of the molecule by a carbon-carbon single bond. If you want to use the more accurate table, you have to put a bit more thought into it - and, in particular, worry about the values which do not always exactly match those in the table!
  • The carbon-oxygen double bond in the peak for the ketone group has a slightly lower value than the table suggests for a ketone. There is an interaction between the carbon-oxygen and carbon-carbon double bonds in the molecule which affects the value slightly. This isn't something which we need to look at in detail for the purposes of this topic.
  • You must be prepared to find small discrepancies of this sort in more complicated molecules - but do not worry about this for exam purposes at this level. Your examiners should give you shift values which exactly match the compound you are given.
  • The two peaks for the carbons in the carbon-carbon double bond are exactly where they would be expected to be. Notice that they aren't in exactly the same environment, and so do not have the same shift values. The one closer to the carbon-oxygen double bond has the larger value.
  • And the methyl group on the end has exactly the sort of value you would expect for one attached to C=O. The table gives a range of 20 - 30, and that's where it is.
One final important thing to notice. There are four carbons in the molecule and four peaks because they are all in different environments. But they aren't all the same height. In C-13 NMR, you cannot draw any simple conclusions from the heights of the various peaks.

Example 1: C-13 NMR spectrum for 1-methylethyl propanoate
1-methylethyl propanoate is also known as isopropyl propanoate or isopropyl propionate.
Here is the structure for 1-methylethyl propanoate:
Two simple peaks
There are two very simple peaks in the spectrum which could be identified easily from the second table above.
The peak at 174 is due to a carbon in a carbon-oxygen double bond. (Looking at the more detailed table, this peak is due to the carbon in a carbon-oxygen double bond in an acid or ester.)
The peak at 67 is due to a different carbon singly bonded to an oxygen. Those two peaks are therefore due to:
If you look back at the more detailed table of chemical shifts, you will find that a carbon singly bonded to an oxygen has a range of 50 - 65. 67 is, of course, a little bit higher than that.
As before, you must expect these small differences. No table can account for all the fine differences in environment of a carbon in a molecule. Different tables will quote slightly different ranges. At this level, you can just ignore that problem!
Before we go on to look at the other peaks, notice the heights of these two peaks we've been talking about. They are both due to a single carbon atom in the molecule, and yet they have different heights. Again, you can't read any reliable information directly from peak heights in these spectra.
The three right-hand peaks
From the simplified table, all you can say is that these are due to carbons attached to other carbon atoms by single bonds. But because there are three peaks, the carbons must be in three different environments.
The easiest peak to sort out is the one at 28. If you look back at the table, that could well be a carbon attached to a carbon-oxygen double bond. The table quotes the group as CH3CO
, but replacing one of the hydrogens by a simple CH3 group won't make much difference to the shift value.
The right-hand peak is also fairly easy. This is the left-hand methyl group in the molecule. It is attached to an admittedly complicated R group (the rest of the molecule). It is the bottom value given in the detailed table.
The tall peak at 22 must be due to the two methyl groups at the right-hand end of the molecule - because that's all that's left. These combine to give a single peak because they are both in exactly the same environment.
If you are looking at the detailed table, you need to think very carefully which of the environments you should be looking at. Without thinking, it is tempting to go for the R2CH2 with peaks in the 16 - 25 region. But you would be wrong!
The carbons we are interested in are the ones in the methyl group, not in the R groups. These carbons are again in the environment: RCH3. The R is the rest of the molecule.
The table says that these should have peaks in the range 10 - 15, but our peak is a bit higher. This is because of the presence of the nearby oxygen atom. Its electronegativity is pulling electrons away from the methyl groups - and, as we've seen above, this tends to increase the chemical shift slightly.

Working out structures from C-13 NMR spectra

So far, we have just been trying to see the relationship between carbons in particular environments in a molecule and the spectrum produced. We've had all the information necessary. Now let's make it a little more difficult - but we'll work from much easier examples! In each example, try to work it out for yourself before you read the explanation.
How could you tell from just a quick look at a C-13 NMR spectrum (and without worrying about chemical shifts) whether you had propanone or propanal (assuming those were the only options)?
Because these are isomers, each has the same number of carbon atoms, but there is a difference between the environments of the carbons which will make a big impact on the spectra.
In propanone, the two carbons in the methyl groups are in exactly the same environment, and so will produce only a single peak. That means that the propanone spectrum will have only 2 peaks - one for the methyl groups and one for the carbon in the C=O group. However, in propanal, all the carbons are in completely different environments, and the spectrum will have three peaks.
 
Example 2: C4H10O

There are four alcohols with the molecular formula C4H10O
.
Which one produced the C-13 NMR spectrum below?
You can do this perfectly well without referring to chemical shift tables at all.
In the spectrum there are a total of three peaks - that means that there are only three different environments for the carbons, despite there being four carbon atoms.
In A and B, there are four totally different environments. Both of these would produce four peaks.
In D, there are only two different environments - all the methyl groups are exactly equivalent. D would only produce two peaks.
That leaves C. Two of the methyl groups are in exactly the same environment - attached to the rest of the molecule in exactly the same way. They would only produce one peak. With the other two carbon atoms, that would make a total of three. The alcohol is C.
 
Example 3
This follows on from Example 2, and also involves an isomer of C4H10O
 but which isn't an alcohol. Its C-13 NMR spectrum is below. Work out what its structure is.
Because we do not know what sort of structure we are looking at, this time it would be a good idea to look at the shift values. The approximations are perfectly good, and we will work from this table:
carbon environment chemical shift (ppm)
C-C 0 - 50
C-O 50 - 100
C=C 100 - 150
C=O 150 - 200
There is a peak for carbon(s) in a carbon-oxygen single bond and one for carbon(s) in a carbon-carbon single bond. That would be consistent with C-C-O in the structure.
It is not an alcohol (you are told that in the question), and so there must be another carbon on the right-hand side of the oxygen in the structure in the last paragraph. The molecular formula is C4H10O, and there are only two peaks. The only solution to that is to have two identical ethyl groups either side of the oxygen. The compound is ethoxyethane (diethyl ether), CH3CH2OCH2CH3.
 
Example 4
Using the simplified table of chemical shifts above, work out the structure of the compound with the following C-13 NMR spectrum. Its molecular formula is C4H6O2
.
Let's sort out what we've got.
  • There are four peaks and four carbons. No two carbons are in exactly the same environment.
  • The peak at just over 50 must be a carbon attached to an oxygen by a single bond.
  • The two peaks around 130 must be the two carbons at either end of a carbon-carbon double bond.
  • The peak at just less than 170 is the carbon in a carbon-oxygen double bond.
Putting this together is a matter of playing around with the structures until you have come up with something reasonable. But you can't be sure that you have got the right structure using this simplified table. In this particular case, the spectrum was for the compound:
If you refer back to the more accurate table of chemical shifts towards the top of the page, you will get some better confirmation of this. The relatively low value of the carbon-oxygen double bond peak suggests an ester or acid rather than an aldehyde or ketone.
It can't be an acid because there has to be a carbon attached to an oxygen by a single bond somewhere - apart from the one in the -COOH group. We've already accounted for that carbon atom from the peak at about 170. If it was an acid, you would already have used up both oxygen atoms in the structure in the -COOH group.
Without this information, though, you could probably come up with reasonable alternative structures. If you were working from the simplified table in an exam, your examiners would have to allow any valid alternatives.



//////////

1 comment:

  1. Amazing post, would you mind checking mine? haute her girl hope you will love it.

    ReplyDelete